10ft DJ Stage Lighting Truss

  • Pro X Stands T-LS31M All Metal 10 ft lighting Truss
  • T-Bar stand reaches up to 12 ft high
  • 10 ft. Portable Lighting Stand Truss
  • 2 Interlocking 5 Foot Sections Of “I” Truss
  • One more 5ft. “I” truss section can be added safely (optional)
  • Hanging bolts included
  • 200 lbs Capacity Evenly Distributed
  • Non-slip rubber feet
  • Aluminum Tubing Diameter: 1 1/2″
  • All metal connectors (never breaks)
  • Package dimensions: 55 x 12 x 11 inches


ProX T-LS31M lighting stands are a tough yet portable lighting solution that is ideal for traveling DJs artists performers nightclubs or stage shows constructed specifically with top-tier safety and performance in mind. ProX T-LS31M is built from metal components that will outlast any other lighting stand. This trussing system offers easy set-up and high stability for your professional equipment. It can also be used as a mounting system for a large format projector screen. It comes with two tripods that telescope to 12.5 feet featuring two locking grooved pins. Also included are two T-bars with four mounting points each and two five-foot trusses that securely lock together to create a ten-foot wide span or be used separately. 

To avoid problems a competent person should inspect all rigging hardware stands and equipment before each use and periodically do a major inspection for signs of wear abuse and general adequacy as well as perform any manufacturer recommended preventive maintenance on schedule.  Observe all warnings and usage instructions in the full manual. 

Basic Usage:

  1. Ensure that the stand is positioned on a hard stable surface in a suitable location on firm ground and clear of overhead obstacles.
  2. Stabilize legs before lifting the tower or any load.
  3. When outdoors secure the tower with braces or cables in the case of wind.

Safety Notes:

  1. Loading on truss and stands should comply with rated weights.
  2. Lock all the safety mechanisms (safety pins knobs)
  3. Loads must be centered & balanced on each lifting unit.
  4. Safety cables or chains must be installed on each item attached to the unit.
  5. Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
  6. During transport close all the sections and and tighten tube clamps
  7. Do not attempt to move the stand when loaded or in an extended position.

Service Notes:

  1. Servicing and repairs must be made by qualified persons.
  2. Telescopic masts must be inspected before each use. Any damaged parts must be replaced immediately.


Additional information

Weight 50 kg
Dimensions 52 × 12 × 11 cm


There are no reviews yet.

Be the first to review “10ft DJ Stage Lighting Truss”