18 Ft. Lighting Crank Truss Stand 330 Lbs.Capacity

• Max Vert Load: 330 lbs.
• Base Diameter: 83.85″ / 7FT
• Item Weight: 140 lbs.
• Min Height: 86″
• Base Closed: 16″ x 15″

Basic Usage:

1. Ensure that the stand is positioned on hard stable surface in suitable location on firm ground and clear of overhead obstacles.
2. Stabilize legs before lifting the tower or any load.
3. When outdoors secure the tower with braces or cables in case of wind.
4. Check the cable it should not show damaged or flattened areas nor broken strands.

Using the Winch:

1. For Lifting the tower turn the winch handle clockwise.
2. For lowering the tower turn the winch handle counter-clockwise.

Safety Notes:

1. Loading on truss and stands should comply with rated weights.
2. Lock all the safety mechanisms (safety pins knobs)
3. Loads must be centered & balanced on each lifting unit.
4. Safety chains must be installed on each item attached to unit.
5. Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
6. During transport close all the sections and lock the lifting carriage.
7. Do not attempt to move the stand when loaded or in extended position.

Service Notes:

1. Servicing and repairs must be made by qualified persons.
2. Cable pulleys and telescopic masts must be inspected before each use. Any damaged cable must be replaced immediately.
3. Annual inspection by an authorized technician is suggested.